DOA COC One Step Cocaine Rapid Test with CE certificate urine Test Device
| Product Name | COC One Step Cocaine Rapid Test |
| Formats | Strip(3mm)Device(4mm) Multi panel |
| Place of Origen | China |
| Specimen | Urine |
| Read Time | 5 minutes |
| Shelf life | 2 years |
| Package | 25 device/box or 50 strip/Box |
| Storage | 2℃-30℃ |
One Step Cocaine Test is a rapid one step test for the qualitative detection of Cocaine and its principal metabolites in human urine at specified cut-off level.
For in vitro diagnostic use only. For professional use only.
INTENDED USE
The One Step Cocaine Test is a lateral flow chromatographic immunoassay for the detection of Cocaine in human urine at the cut-off concentration of 300 ng/ml. This assay provides only a qualitative, preliminary analytical test result. A more specific alternate chemical method must be used in order to obtain a confirmed analytical result. Gas chromatography/mass spectrometry (GC/MS) is the preferred confirmatory method. Clinical consideration and professional judgment should be applied to any drug of abuse test result, particularly when preliminary positive results are used.
SUMMARY
Cocaine derived from leaves of coca plant, is a potent central nervous system stimulant and a local anesthetic. Among the psychological effects induced by using cocaine are euphoria, confidence and a sense of increased energy, accompanied by increased heart rate, dilation of the pupils,
fever, tremors and sweating. Cocaine is excreted in urine primarily as benzoylecgonine in a short period of time.
TEST PROCEDURE
Test must be in room temperature (15ºC to 30ºC)
Device:
- Remove a testing device from the foil pouch by tearing at the notch and place it on a level surface.
- Holding a sample dropper vertically, add exactly four drops of the urine specimen to the sample well.
- Read results in 5 minutes. Do not read after 10 minutes.
Strip:
- Remove the test strip from the sealed pouch and use it as soon as possible.
- With arrows pointing toward the urine specimen, immerse the test strip vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum line (MAX) on the test strip when immersing the strip.
- Place the test strip on a non-absorbent flat surface, start the timer and wait for the red line(s) to appear.
- The result should be read at 5 minutes. Do not interpret the result after 10 minutes.
